ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 237)

Ethernet Switch CLI Reference Guide
237
C
H A P T E R
68
VLAN Mapping Commands
Use these commands to configure VLAN mapping on the Switch. With VLAN mapping
enabled, the Switch can map the VLAN ID and priority level of packets received from a
private network to those used in the service provider’s network. The Switch discards the
tagged packets that do not match an entry in the VLAN mapping table.
"
You can not enable VLAN mapping and VLAN stacking at the same time.
68.1 Command Summary
The following section lists the commands for this feature.
Table 144 vlan mapping Command Summary
COMMAND DESCRIPTION M P
no vlan-mapping Disables VLAN mapping on the Switch. C 13
no vlan-mapping interface port-
channel <port> vlan <1-4094> Removes the specified VLAN mapping rule. C 13
no vlan-mapping interface port-
channel <port> vlan <1-4094>
inactive Enables the specified VLAN mapping rule. C 13
vlan-mapping Enables VLAN mapping on the Switch. C 13
vlan-mapping name
interface port-channel <port>
vlan <1-4094> translated-vlan
<1-4094> priority <0-7> Creates a VLAN mapping rule. C 13
vlan-mapping name
interface port-channel <port>
vlan <1-4094> translated-vlan
<1-4094> priority <0-7> inactive Disables the specified VLAN mapping rule. C 13
interface port-channel <port-
list> Enters config-interface mode for the specified port(s). C 13
vlan-mapping Enables VLAN mapping on the port(s). C 13
no vlan-mapping Disables VLAN mapping on the port(s). C 13