ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 31)

Ethernet Switch CLI Reference Guide
31
C
H A P T E R
4
AAA Commands
Use these commands to configure authentication, authorization and accounting on the Switch.
4.1 Command Summary
The following section lists the commands for this feature.
Table 9 aaa authentication Command Summary
COMMAND DESCRIPTION M P
show aaa authentication Displays what methods are used for authentication. E 3
show aaa authentication enable Displays the authentication method(s) for checking privilege
level of administrators.
E 3
aaa authentication enable
<method1> [<method2> ...] Specifies which method should be used first, second, and
third for checking privileges.
method: enable, radius, or tacacs+.
C 14
no aaa authentication enable Resets the method list for checking privileges to its default
value.
C 14
show aaa authentication login Displays the authentication methods for administrator login
accounts.
E 3
aaa authentication login
<method1> [<method2> ...] Specifies which method should be used first, second, and
third for the authentication of login accounts.
method: local, radius, or tacacs+.
C 14
no aaa authentication login Resets the method list for the authentication of login accounts
to its default value.
C 14
Table 10 Command Summary: aaa accounting
COMMAND DESCRIPTION M P
show aaa accounting Displays accounting settings configured on the Switch. E 3
show aaa accounting update Display the update period setting on the Switch for
accounting sessions.
E 3
aaa accounting update periodic
<1-2147483647> Sets the update period (in minutes) for accounting sessions.
This is the time the Switch waits to send an update to an
accounting server after a session starts.
C 13
no aaa accounting update Resets the accounting update interval to the default value. C 13
show aaa accounting commands Displays accounting settings for recording command events. E 3
aaa accounting commands
<privilege> stop-only tacacs+
[broadcast] Enables accounting of command sessions and specifies the
minimum privilege level (0-14) for the command sessions that
should be recorded. Optionally, sends accounting information
for command sessions to all configured accounting servers at
the same time.
C 13