beautypg.com

4 saving your configuration, 5 logging out, 17 1.4 saving your configuration – ZyXEL Communications ZyXEL Dimension ES-2024PWR User Manual

Page 17

background image

Chapter 1 How to Access and Use the CLI

Ethernet Switch CLI Reference Guide

17

1.4 Saving Your Configuration

When you run a command, the Switch saves any changes to its run-time memory. The Switch
loses these changes if it is turned off or loses power. Use the

write memory

command in

enable mode to save the current configuration permanently to non-volatile memory.

"

You should save your changes after each CLI session. All unsaved
configuration changes are lost once you restart the Switch.

1.5 Logging Out

Enter

logout

to log out of the CLI. You have to be in user, enable, or config mode. See

Chapter 2 on page 19

for more information about modes.

sysname# write memory

See also other documents in the category ZyXEL Communications Computer Accessories: