ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 126)

Chapter 29 Layer 2 Protocol Tunnel (L2PT) Commands
Ethernet Switch CLI Reference Guide
126
l2protocol-tunnel point-to-
point Enables point-to-point layer 2 protocol tunneling for
LACP (Link Aggregation Control Protocol), PAgP (Port
Aggregation Protocol) and UDLD (UniDirectional Link
Detection) packets on the specified port(s).
C 13
l2protocol-tunnel point-to-
point lacp Enables point-to-point layer 2 protocol tunneling for
LACP packets on the specified port(s).
C 13
l2protocol-tunnel point-to-
point pagp Enables point-to-point layer 2 protocol tunneling for
PAgP packets on the specified port(s).
C 13
l2protocol-tunnel point-to-
point udld Enables point-to-point layer 2 protocol tunneling for
UDLD packets on the specified port(s).
C 13
l2protocol-tunnel stp Enables layer 2 protocol tunneling for STP packets on
the specified port(s).
C 13
l2protocol-tunnel vtp Enables layer 2 protocol tunneling for CDP packets on
the specified port(s).
C 13
no l2protocol-tunnel Disables layer 2 protocol tunneling for CDP, VTP and
STP packets on the specified port(s).
C 13
no l2protocol-tunnel cdp Disables layer 2 protocol tunneling for CDP packets on
the specified port(s).
C 13
no l2protocol-tunnel point-to-
point Disables point-to-point layer 2 protocol tunneling for
LACP, PAgP and UDLD packets on the specified port(s).
C 13
no l2protocol-tunnel point-to-
point lacp Disables point-to-point layer 2 protocol tunneling for
LACP packets on the specified port(s).
C 13
no l2protocol-tunnel point-to-
point pagp Disables point-to-point layer 2 protocol tunneling for
PAgP packets on the specified port(s).
C 13
no l2protocol-tunnel point-to-
point udld Enables point-to-point layer 2 protocol tunneling for
UDLD packets on the specified port(s).
C 13
no l2protocol-tunnel stp Disables layer 2 protocol tunneling for STP packets on
the specified port(s).
C 13
no l2protocol-tunnel vtp Disables layer 2 protocol tunneling for VTP packets on
the specified port(s).
C 13
l2protocol-tunnel Enables layer 2 protocol tunneling on the Switch. C 13
l2protocol-tunnel mac Sets the destination MAC address used for
encapsulating layer 2 protocol packets received on an
access port.
C 13
no l2protocol-tunnel Disables layer 2 protocol tunneling on the Switch. C 13
show l2protocol-tunnel Displays layer 2 protocol tunneling settings and counters
for all ports.
E 13
show l2protocol-tunnel interface
port-channel <port-list> Displays layer 2 protocol tunneling settings and counters
for the specified port(s).
E 13
Table 75 l2pt Command Summary (continued)
COMMAND DESCRIPTION M P