ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 159)

Ethernet Switch CLI Reference Guide
159
C
H A P T E R
42
MVR Commands
Use these commands to configure Multicast VLAN Registration (MVR).
42.1 Command Summary
The following section lists the commands for this feature.
Table 96 mvr Command Summary
COMMAND DESCRIPTION M P
show mvr Shows the MVR status. E 3
show mvr <vlan-id> Shows the detailed MVR status and MVR group configuration
for a VLAN.
E 3
mvr <vlan-id> Enters config-mvr mode for the specified MVR (multicast
VLAN registration). Creates the MVR, if necessary.
C 13
8021p-priority <0-7> Sets the IEEE 802.1p priority of outgoing MVR packets. C 13
inactive Disables these MVR settings. C 13
no inactive Enables these MVR settings. C 13
mode Sets the MVR mode (dynamic or compatible). C 13
name <name> Sets the MVR name for identification purposes.
name: 1-32 English keyboard characters C 13
receiver-port <port-list> Sets the receiver port(s).An MVR receiver port can only
receive multicast traffic in a multicast VLAN.
C 13
no receiver-port <port-list> Disables the receiver port(s).An MVR receiver port can only
receive multicast traffic in a multicast VLAN.
C 13
source-port <port-list> Sets the source port(s).An MVR source port can send and
receive multicast traffic in a multicast VLAN.
C 13
no source-port <port-list> Disables the source port(s).An MVR source port can send
and receive multicast traffic in a multicast VLAN.
C 13
tagged <port-list> Sets the port(s) to tag VLAN tags. C 13
no tagged <port-list> Sets the port(s) to untag VLAN tags. C 13
group <name> start-address
<ip> end-address <ip> Sets the multicast group range for the MVR.
name: 1-32 English keyboard characters C 13
no group Disables all MVR group settings. C 13
no group <name-str> Disables the specified MVR group setting. C 13
no mvr <vlan-id> Removes an MVR configuration of the specified VLAN from
the Switch.
C 13