ZyXEL Communications NBG-419N - Manual (Page 87)

Chapter 9 WISP Mode
NBG-419N User’s Guide
87
9.5.2 WPA(2)-PSK
Use this screen if the access point to which you want to connect uses WPA(2)-PSK
security mode.
Figure 55 WPA-PSK/WPA2-PSK (WISP)
The following table describes the labels in this screen. .
Table 33 WPA-PSK/WPA2-PSK (WISP)
LABEL DESCRIPTION
Wireless Setup
Network Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Encryption Type Select the type of wireless encryption employed by the access point to
which you want to connect.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for
authentication.
Type the pre-shared key employed by the access point to which you
want to connect.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to reload the previous configuration for this screen.