Remote management, 1 overview, 2 what you can do – ZyXEL Communications NBG-419N User Manual
Page 181: 3 what you need to know, Chapter 22 remote management
NBG-419N User’s Guide
181
C
H A P T E R
22
Remote Management
22.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG-419N from a remote
location through the following interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The NBG-419N is managed using the Web Configurator.
22.2 What You Can Do
Use the WWW screen (
) to define the interface/s from
which the NBG-419N can be managed remotely and specify a secure client that
can manage the NBG-419N.
22.3 What You Need to Know
Remote management over LAN or WAN will not work when:
1
The IP address in the Secured Client IP Address field (
) does not match the client IP address. If it does not match, the NBG-419N
will disconnect the session immediately.
2
There is already another remote management session. You may only have one
remote management session running at one time.
3
There is a firewall rule that blocks it.