ZyXEL Communications NBG-419N - Manual (Page 44)

Chapter 4 Monitor
NBG-419N User’s Guide
44
The monitor shows what kinds of applications are running in the network, the
maximum kbps that each application can use, as well as the percentage of
bandwidth it is using.
Figure 21 Summary: BW MGMT Monitor
4.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the NBG-419N’s LAN as a DHCP server or disable it. When configured as
a server, the NBG-419N provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on that network, or else
the computer must be manually configured.
Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only
information here relates to your DHCP status. The DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address)
of all network clients using the NBG-419N’s DHCP server.
Figure 22 Summary: DHCP Table