ZyXEL Communications NBG-419N - Manual (Page 104)

Chapter 11 Wireless LAN
NBG-419N User’s Guide
104
See the rest of this chapter for information on the other labels in this screen.
11.4.1 No Security
Select No Security to allow wireless stations to communicate with the access
points without any data encryption.
Note: If you do not enable any wireless security on your NBG-419N, your network is
accessible to any wireless networking device that is within range.
Figure 68 Network > Wireless LAN > General: No Security
Operating
Channel This displays the channel the NBG-419N is currently using.
Security
Security
Mode
Select WEP, WPA-PSK or WPA2-PSK to add security on this wireless
network. The wireless clients which want to associate to this network
must have same wireless security settings as the NBG-419N. After you
select to use a security, additional options appears in this screen. See
11.4.2 and 11.4.3 sections.
Or you can select No Security to allow any client to associate this
network without authentication.
Note: If you enable the WPS function, only No Security, WPA-PSK
and WPA2-PSK are available in this field.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to reload the previous configuration for this screen.
Table 36 Network > Wireless LAN > General
LABEL DESCRIPTION