ZyXEL Communications NBG-419N - Manual (Page 152)

Chapter 17 Static Route
NBG-419N User’s Guide
152
17.3 IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
Figure 99 Network > Static Route
The following table describes the labels in this screen.
Table 61 Network > Static Route
LABEL DESCRIPTION
Static Routing Settings
Route Name
Enter a the name that describes or identifies this route.
Destination IP
Address Enter the IP network address of the final destination.
IP Subnet
Netmask This is the subnet to which the route’s final destination belongs.
Gateway IP
Address Enter the the IP address of the gateway.
Metric Assign a number to identify the route.
Add Rule Click this to add the IP static route.
Application Rules Summary
No.
This is the number of an individual static route.
Active The rules are always on and this is indicated by the icon.
Name This is the name that describes or identifies this route.
Destination This parameter specifies the IP network address of the final destination.
Routing is always based on network number.