ZyXEL Communications NBG-419N - Manual (Page 34)

Chapter 2 Connection Wizard
NBG-419N User’s Guide
34
The following table describes the labels in this screen.
2.5.2 Wireless Security: WPA-PSK/WPA2-PSK
Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set
up a password for your wireless network.
Figure 14 Wireless Security: WPA-PSK/WPA2-PSK
Table 7 Wireless Security: No Security
LABEL DESCRIPTION
Wireless
Network
Name
(SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the NBG-419N, make sure all wireless stations
use the same SSID in order to access the network.
Security
mode Select a Security level from the drop-down list box.
Choose None to have no wireless LAN security configured. If you do not
enable any wireless security on your NBG-419N, your network is accessible
to any wireless networking device that is within range.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.