ZyXEL Communications NBG-419N - Manual (Page 177)

Chapter 21 Bandwidth Management
NBG-419N User’s Guide
177
21.5.2 Rule Configuration: User Defined Service Rule
Configuration
If you want to edit a bandwidth management rule for other applications or
services, click the Edit icon in the User-defined Service table of the Advanced
screen. The following screen displays.
Figure 109 Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen
Table 69 Bandwidth Management Rule Configuration: User-defined Service
LABEL DESCRIPTION
BW Budget Select Maximum Bandwidth or Minimum Bandwidth and specify
the maximum or minimum bandwidth allowed for the rule in kilobits per
second.
Destination
Address Enter the IP address of the destination computer.
The NBG-419N applies bandwidth management to the service or
application that is entering this computer.
Destination
Subnet
Netmask Enter the subnet netmask of the destination of the traffic for which the
bandwidth management rule applies.
Destination Port This is the port number of the destination that define the traffic type,
for example TCP port 80 defines web traffic.
Source Address Enter the IP address of the computer that initializes traffic for the
application or service.
The NBG-419N applies bandwidth management to traffic initiating from
this computer.
Source Subnet
Netmask Enter the subnet netmask of the computer initiating the traffic for which
the bandwidth management rule applies.
Source Port This is the port number of the source that define the traffic type, for
example TCP port 80 defines web traffic.