ZyXEL Communications NBG-419N - Manual (Page 85)

Chapter 9 WISP Mode
NBG-419N User’s Guide
85
The following table describes the labels in this screen.
9.5.1 Static WEP
Use this screen if the access point to which you want to connect to uses WEP
security mode.
Figure 54 WEP (WISP)
The following table describes the labels in this screen..
Table 31 No Security (WISP)
LABEL DESCRIPTION
Wireless Setup
Network
Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security
Mode
Select No Security in this field.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to reload the previous configuration for this screen.
Table 32 WEP (WISP)
LABEL DESCRIPTION
Wireless Setup
Network
Name (SSID)
Enter the name of the access point to which you are connecting.
Security