Toshiba H1 SERIES TLCS-900 - Manual (Page 4)

TMP92CM22
2007-02-16 92CM22-2
(4) External memory expansion
• Expandable up to 16 Mbytes (Shared program/data area)
• Can simultaneously support 8-/16-bit width external data bus
･･･
Dynamic data bus sizing
• Separate bus system
(5) Memory controller
• Chip select output: 4 channels
(6) 8-bit timers: 4 channels
(7) 16-bit timers: 2 channels
(8) General-purpose serial interface: 2 channels
• UART/synchronous mode
• IrDA
(9) Serial bus interface: 1 channel
• I 2 C bus mode
• Clock synchronous mode
(10) 10-bit AD converter: 8 channels
(11) Watchdog timer
(12) Interrupts: 41 interrupts
• 9 CPU interrupts: Software interrupt instruction and illegal instruction
• 25 internal interrupts: Seven selectable priority levels
• 7 external interrupts: Seven selectable priority levels (INT0 to INT5 and NMI )
(INT0 to INT3 selectable edge or level interrupt)
(13) Input/output ports: 50 pins (exclude Data bus 8-bit, Address bus 24-bit and RD pin)
(14) Standby function
• Three HALT modes: IDLE2 (Programmable), IDLE1, STOP
(15) Dual-clock controller
• PLL: fc = f
OSCH
× 4 (fc = 40 MHz at f
OSCH
= 10 MHz)
• Clock gear function: Select a high-frequency clock fc to fc/16
(16) Operating voltage
• DVCC = 3.0 V to 3.6 V (fc max = 40 MHz)
(17) Package
• 100-pin QFP: P-LQFP100-1414-0.50F