Texas Instruments Dual/Single Socket CardBus and UntraMedia Controller PCI7621 - Manual (Page 212)

8−32
8.35 Asynchronous Request Filter High Register
The asynchronous request filter high set/clear register enables asynchronous receive requests on a per-node basis,
and handles the upper node IDs. When a packet is destined for either the physical request context or the ARRQ
context, the source node ID is examined. If the bit corresponding to the node ID is not set to 1 in this register, then
the packet is not acknowledged and the request is not queued. The node ID comparison is done if the source node
is on the same bus as the PCI7x21/PCI7x11 controller. Nonlocal bus-sourced packets are not acknowledged unless
bit 31 in this register is set to 1. See Table 8−27 for a complete description of the register contents.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name Asynchronous request filter high
Type RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Asynchronous request filter high
Type RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Register: Asynchronous request filter high
Offset: 100h set register
104h clear register
Type: Read/Set/Clear
Default: 0000 0000h
Table 8−27. Asynchronous Request Filter High Register Description
BIT FIELD NAME TYPE DESCRIPTION
31 asynReqAllBuses RSC If bit 31 is set to 1, all asynchronous requests received by the controller from nonlocal bus nodes
are accepted.
30 asynReqResource62 RSC If bit 30 is set to 1 for local bus node number 62, asynchronous requests received by the controller
from that node are accepted.
29 asynReqResource61 RSC If bit 29 is set to 1 for local bus node number 61, asynchronous requests received by the controller
from that node are accepted.
28 asynReqResource60 RSC If bit 28 is set to 1 for local bus node number 60, asynchronous requests received by the controller
from that node are accepted.
27 asynReqResource59 RSC If bit 27 is set to 1 for local bus node number 59, asynchronous requests received by the controller
from that node are accepted.
26 asynReqResource58 RSC If bit 26 is set to 1 for local bus node number 58, asynchronous requests received by the controller
from that node are accepted.
25 asynReqResource57 RSC If bit 25 is set to 1 for local bus node number 57, asynchronous requests received by the controller
from that node are accepted.
24 asynReqResource56 RSC If bit 24 is set to 1 for local bus node number 56, asynchronous requests received by the controller
from that node are accepted.
23 asynReqResource55 RSC If bit 23 is set to 1 for local bus node number 55, asynchronous requests received by the controller
from that node are accepted.
22 asynReqResource54 RSC If bit 22 is set to 1 for local bus node number 54, asynchronous requests received by the controller
from that node are accepted.
21 asynReqResource53 RSC If bit 21 is set to 1 for local bus node number 53, asynchronous requests received by the controller
from that node are accepted.
20 asynReqResource52 RSC If bit 20 is set to 1 for local bus node number 52, asynchronous requests received by the controller
from that node are accepted.
19 asynReqResource51 RSC If bit 19 is set to 1 for local bus node number 51, asynchronous requests received by the controller
from that node are accepted.