Texas Instruments Dual/Single Socket CardBus and UntraMedia Controller PCI7621 - Manual (Page 161)

7−1
7 OHCI Controller Programming Model
This section describes the internal PCI configuration registers used to program the PCI7x21/PCI7x11 1394 open host
controller interface. All registers are detailed in the same format: a brief description for each register is followed by
the register offset and a bit table describing the reset state for each register.
A bit description table, typically included when the register contains bits of more than one type or purpose, indicates
bit field names, a detailed field description, and field access tags which appear in the type column. Table 4−1
describes the field access tags.
The PCI7x21/PCI7x11 controller is a multifunction PCI device. The 1394 OHCI is integrated as PCI function 2. The
function 2 configuration header is compliant with the PCI Local Bus Specification as a standard header. Table 7−1
illustrates the configuration header that includes both the predefined portion of the configuration space and the
user-definable registers.
Table 7−1. Function 2 Configuration Register Map
REGISTER NAME OFFSET
Device ID Vendor ID 00h
Status Command 04h
Class code Revision ID 08h
BIST Header type Latency timer Cache line size 0Ch
OHCI base address 10h
TI extension base address 14h
CardBus CIS base address 18h
Reserved 1Ch−27h
CardBus CIS pointer ‡ 28h
Subsystem ID ‡ Subsystem vendor ID ‡ 2Ch
Reserved 30h
Reserved
PCI power
management
capabilities pointer
34h
Reserved 38h
Maximum latency ‡ Minimum grant ‡ Interrupt pin Interrupt line 3Ch
PCI OHCI control 40h
Power management capabilities Next item pointer Capability ID 44h
PM data PMCSR_BSE Power management control and status ‡ 48h
Reserved 4Ch−EBh
PCI PHY control ‡ ECh
PCI miscellaneous configuration ‡ F0h
Link enhancement control ‡ F4h
Subsystem access ‡ F8h
GPIO control FCh
‡ One or more bits in this register are cleared only by the assertion of GRST.