Toshiba 6F3B0253 - Manual (Page 6)

6F3B0253
4
T1-16S User’s Manual
Safety Precautions
Installation:
1. Excess temperature, humidity, vibration, shocks, or dusty and corrosive gas
environment can cause electrical shock, fire or malfunction. Install and use the T1-
16S and related equipment in the environment described in this manual.
2. Improper installation directions or insufficient installation can cause fire or the units
to drop. Install the T1-16S and related equipment in accordance with the instructions
described in this manual.
3. Turn off power before installing or removing any units, modules, racks, terminal
blocks or battery. Failure to do so can cause electrical shock or damage to the T1-
16S and related equipment.
4. Entering wire scraps or other foreign debris into to the T1-16S and related
equipment can cause fire or malfunction. Pay attention to prevent entering them into
the T1-16S and related equipment during installation and wiring.
5. Turn off power immediately if the T1-16S or related equipment is emitting smoke or
odor. Operation under such situation can cause fire or electrical shock. Also
unauthorized repairing will cause fire or serious accidents. Do not attempt to repair.
Contact Toshiba for repairing.
Wiring:
1. Turn off power before wiring to minimize the risk of electrical shock.
2. Exposed conductive parts of wire can cause electrical shock. Use crimp-style
terminals with insulating sheath or insulating tape to cover the conductive parts. Also
close the terminal covers securely on the terminal blocks when wiring has been
completed.
3. Operation without grounding may cause electrical shock or malfunction. Connect the
ground terminal on the T1-16S to the system ground.
4. Applying excess power voltage to the T1-16S can cause explosion or fire. Apply
power of the specified ratings described in the manual.
5. Improper wiring can cause fire, electrical shock or malfunction. Observe local
regulations on wiring and grounding.
! CAUTION
! CAUTION