Toshiba 6F3B0253 - Manual (Page 210)

6F3B0253
208
T1-16S User’s Manual
7. Instructions
FUN 140 EI Enable interrupt
Expression
Input
−
[ EI ]
−
Output
Function
When the input is ON, this instruction enables the execution of user designated interrupt operation,
i.e. timer interrupt program and I/O interrupt programs.
Execution condition
Input Operation Output
OFF No execution OFF
ON Execution ON
Operand
No operand is required.
Example
In the above example, the DI instruction disables the interrupt. Then the EI instruction enables
the interrupt again. As a result, the rung 2 instructions can be executed without interruption
between each instructions.
Note
•
Refer to the DI instruction (FUN 141).
•
If an interrupt factor is occurred during the interrupt disabled state, the interrupt is kept waiting
and it will be executed just after the EI instruction is executed.
•
The EI instruction can be used only in the main program.