Roland RK-500 - Manual (Page 25)

24
Before You Play
1. Make sure that the [Power On] switch located
at the left side of the keyboard is off (in the
upward position).
fig.PowerOn.eps
2. Connect the included power cord to the AC
INLET located at the rear of the bottom panel.
fig.ACcord.eps
3. Plug the other end of the power cord into an
AC outlet.
You must use the power cord included with the
VIMA.
Once you’ve got everything connected properly, you
can turn on the power using the following procedure.
If you fail to perform these steps in the correct order,
you risk causing a malfunction or damaging your
speakers.
Turning the Power On
1. Turn the [VOLUME] knob all the way toward
the left to minimize the volume.
fig.VolumeMin.eps
2. Press the [Power On] switch.
fig.PowerOn.eps
The power will turn on, and after several images have
appeared in the VIMA’s display, the main screen will
appear.
After a brief interval, you’ll be able to produce sounds
by playing the keyboard.
→ Main screen (p. 23)
Due to a circuitry protection feature, this unit requires
a few moments after power is turned on before it is
ready for normal operation.
3. Use the [VOLUME] knob to adjust the volume
(p. 25).
Getting Ready to Play
Connecting the Power Cord
Power On
OFF
Upward
position
Power Cord
AC Outlet
AC INLET
NOTE
Turning the Power On/Off
NOTE
Power On
ON
Lower
position
NOTE
RK-500-e.book 24 ページ ２００６年８月１１日 金曜日 午後４時２９分