Roland RK-500 - Manual (Page 130)

129
Settings
1. Access the main screen.
If the main screen is not shown, press the [EXIT] button
several times to access the main screen.
fig.d-MainScreen.eps
2. In the main screen, touch
The menu screen appears.
fig.d-Function-01-2.eps
3. Touch .
A screen like the following appears.
fig.d-Function-14.eps
4. Touch for “USB Driver.”
5. Press the [EXIT] button when you’re finished
making settings.
6. Turn the VIMA’s volume to the minimum
setting. Next, switch off the power, then turn it
on again.
Normally, you don’t need to install a driver in order to connect
the VIMA to your computer via the USB connector. However, if
some problem occurs, or if the performance is poor, using the
original Roland driver may solve the problem. If you do so,
make the following setting to specify the USB driver you intend
to use before you install the driver.
For details on downloading and installing the
original driver, refer to the Roland website.
Roland website: http://www.roland.com/
For details on connecting the VIMA to your computer
via the USB connector, refer to “Connecting Your
Computer” (p. 137).
USB Driver Settings
Changing the USB Driver Settings
(USB Driver)
Setting Explanation
Generic
Choose this if you want to use the standard USB
driver that was included with your computer.
Normally, you should use this mode.
Original
Choose this if you want to use a USB driver
downloaded from the Roland website.
RK-500-e.book 129 ページ ２００６年８月１１日 金曜日 午後４時２９分