Roland RK-500 - Manual (Page 127)

126
Settings
1. Access the main screen.
If the main screen is not shown, press the [EXIT] button
several times to access the main screen.
fig.d-MainScreen.eps
2. In the main screen, touch
The menu screen appears.
fig.d-Function-01-2.eps
3. Touch .
A screen like the following appears.
fig.d-Function-12.eps
4. Touch for “D Beam Sensitivity.”
5. Press the [EXIT] button when you’re finished
making settings.
You can adjust the sensitivity of the D Beam controller.
Increasing this setting will make the D Beam controller more
responsive.
The sensitivity of the D Beam controller can vary depending on
the brightness of the surroundings. If it does not operate as
you expect, please readjust the sensitivity.
D Beam Controller Settings Adjusting the Sensitivity of the D Beam
Controller (D Beam Sensitivity)
Settings
1–127
RK-500-e.book 126 ページ ２００６年８月１１日 金曜日 午後４時２９分