NEC Express 5800/230Eh - Manual (Page 85)

Configuring Your Server 4-21
See the table below for the items.
Option Parameter Description Your Setting
Supervisor
Password Is Clear
Set Indicates the password setting status.
User Password Is Clear
Set Indicates the password setting status.
Set Supervisor
Password Up to eight
alphanumerics Press Enter to display the supervisor
password entry screen. This password
enables all the SETUP menus to be
accessed. This setting can be done
only on login with the password input
of "Supervisor" at start of SETUP.
Set User
Password Up to eight
alphanumerics Press Enter to display the user
password input screen. For this
password, accessing to the SETUP
menu is restricted.
Password on boot* [Disabled]
Enabled
Specify whether the passwords are
entered or not on booting. At first the
supervisor password must be set. If
the supervisor password is set and
this option is disabled, BIOS
determines that a user is booting.
Fixed disk boot
sector [Normal]
Write Protect Specify whether to permit writing into
boot sector of the hard disk drive or
not.
Power Switch
Inhibit [Disabled]
Enabled Specify whether to enable or disable
the power switch feature.
[ ]: Factory-set
* You can set this item on [Set Supervisor Password] menu.