NEC Express 5800/230Eh - Manual (Page 78)

4-14 Configuring Your Server
Memory Configuration
The following screen appears if you select "Memory Configuration" on the Advanced menu.
See the table below for the items.
Option Parameter Description Your Setting
System
Memory – Indicates the total capacity of the base
memory. (View only)
Extended
Memory – Indicates the total capacity of the memory
available for OS. (View only)
DIMM Group
#1 Status
DIMM Group
#2 Status
DIMM Group
#3 Status Normal
Disabled
Not installed Indicates the current memory status. (View
only)
"Normal" indicates that the memory devices
operate normally.
"Disabled" indicates that one or more memory
devices are defected.
"Not Installed" indicates that no memory
devices are installed.
On-screen group numbers and DIMM
slockets on mother board are associated as
follows.
Group #1: DIMM #A-1, #B-1
Group #2: DIMM #A-2, #B-2
Group #3: DIMM #A-3, #B-3
Each group is composed of two DIMMs of
interleave type.
Memory
Retest [No]
Yes If you select [Yes], BIOS will clear historical
memory status and retest all the DIMMs on
the next boot.
This parameter is automatically
reset to "No" at the next boot.
Extended
RAM Step 1MB
1KB
Every location
[Disabled] Specify whether to execute a memory test for
extended memory or not. If the test is
executed, specify the block size.
Sparing [Disabled]
Enabled Specify whether to enable or disable online
spare memory feature.
[ ]: Factory-set