NEC Express 5800/230Eh - Manual (Page 77)

Configuring Your Server 4-13
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
If you select a menu item preceded by symbol
³
and press Enter, the appropriate submenu appears.
See the table below for the items.
Option Parameter Description Your Setting
Memory
Configuration – Displays submenu.
PCI Configuration – Displays submenu.
Peripheral
Configuration – Displays submenu.
Advanced Chipset
Control – Displays submenu.
Boot-time
Diagnostic Screen [Disabled]
Enabled Specify whether the power-on self-test
(POST) running screen is displayed or not
on booting. If disabled, the BIOS will display
the NEC logo during POST. Press Esc to
switch to the POST running screen.
Reset
Configuration Data [No]
Yes Select "Yes" if you want to clear the system
configuration data stored in POST. This
parameter is automatically reset to "No" at
the next boot.
NumLock On
[Off] Specify whether to enable or disable the
Numlock feature at system start-up.
Memory/Processor
Error [Boot]
Halt Specify whether to stop POST execution if a
memory or processor error was detected
during POST.
[ ]: Factory-set