NEC Express 5800/230Eh - Manual (Page 43)

General Description 2-15
Off-line Maintenance Utility
The Off-line Maintenance Utility is used for maintenance and fault analysis of the server. This
utility is usually used by the service representative. See Chapter 8 for details.
System Diagnostic Utility
The system diagnostic utility contained in the NEC EXPRESSBUILDER is useful to detect
hardware failures. See Chapter 7 for details.
Remote Management
The server may be monitored and managed via LAN/WAN by installing the optional Remote
Management (N8115-03) and NEC DianaScope utility. To use the NEC DianaScope, a separately
priced server license is required.
The Remote Management performs the following:
„
Monitoring of temperature, voltage, and fans
„ Generation of SEL (system event log) at occurrence of hardware failure
„ Monitoring of OS stall by using watchdog timer
„ Notification after occurrence of OS stop error
„ Remote management via LAN/WAN by using NEC DianaScope (e.g., resetting the server,
power on/off, viewing System Event Log (SEL))
NOTES:
„ Notes on using Remote Management (N8115-03)
– Booting the server from the NEC EXPRESSBUILDER CD by
using the Remote Media function is not available.
– For the latest information about Remote Console/Remote Media
function, visit our web site.
„ The following functions are not supported in the command line
interface of EXPRESSSCOPE Engine.
– Power state acquisition
– STATUS LED state acquisition