NEC Express 5800/230Eh - Manual (Page 82)

4-18 Configuring Your Server
Option Parameter Description Your Setting
Parallel ATA Disabled
[Enabled] Selects whether the parallel ATA is
enabled or disabled.
Serial ATA Disabled
[Enabled] Selects whether the serial ATA is
enabled or disabled.
SATA Controller
Mode Option [Compatible]
Enhanced This menu is available only when
"Serial ATA" is enabled.
Selects the SATA Controller Mode
Option on mother board.
"Compatible": Automatically detects
SATA hard disk drive and controls it as
the normal hard disk drive.
"Enhanced": Automatically detects
SATA hard disk drive and controls it in
native IDE mode.
SATA AHCI [Disabled]
Enabled This option is available only when
"Enhanced" is set for "SATA Controller
Mode Option".
Selects whether the SATA AHCI is
enabled or disabled.
SATA RAID [Disabled]
Enabled This option is available only when
"Enhanced" is set for "SATA Controller
Mode Option".
Selects whether the RAID disk drives
that uses the onboard SATA is
enabled or disabled.
Note: If you attempt to start the system
from SATA hard disk drive with
different setting, the data may be
destroyed.
[ ]: Factory-set