3 displaying log messages – Planet Technology SGSD-1022 User Manual
Page 74
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
74
Range: 16-23,
Default: 23
• Logging Trap
Limits log messages that are sent to the remote syslog server for all levels up to
the specified level. For example, if level 3 is specified, all messages from level 0
to level 3 will be sent to the remote server.
Range: 0-7,
Default: 7
• Host IP List
Displays the list of remote server IP addresses that receive the syslog messages.
The maximum number of host IP addresses allowed is five.
• Host IP Address
Specifies a new server IP address to add to the Host IP List.
Host IP Address = Syslog Server IP address
4.2.8.3 Displaying Log Messages
The Logs page allows you to scroll through the logged system and event messages. The Managed Switch can store up to 2048
log entries in temporary random access memory (RAM; i.e., memory flushed on power reset) and up to 4096 entries in
permanent flash memory.
Figure 4-2-19 System and event logs screenshot