Planet Technology SGSD-1022 - Manual (Page 541)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
541
Console(config)#mac-address-table aging-time 100
Console(config)#
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging time: 100 sec.
Console#
5.20 Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA) globally for the switch, and commands that
configure STA for the selected interface.
Command Function Mode
spanning-tree Enables the spanning tree protocol GC
spanning-tree mode Configures STP, RSTP or MSTP mode GC
spanning-tree forward-time Configures the spanning tree bridge forward time GC
spanning-tree hello-time Configures the spanning tree bridge hello time GC
spanning-tree max-age Configures the spanning tree bridge maximum age GC
spanning-tree priority Configures the spanning tree bridge priority GC
spanning-tree path-cost method Configures the path cost method for RSTP/MSTP GC
spanning-tree
transmission-limit
Configures the transmission limit for RSTP/MSTP GC
spanning-tree mst-configuration Changes to MSTP configuration mode GC
mst vlan Adds VLANs to a spanning tree instance MST