Planet Technology SGSD-1022 - Manual (Page 367)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
367
!
spanning-tree MST configuration
!
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
switchport allowed vlan add 4093 tagged
..
interface vlan 1
ip address DHCP
!
line console
!
line vty
!
end
Console#
Related Commands
show running-config
show running-config
This command displays the configuration information currently in use.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Use this command in conjunction with the show startup-config command to compare the information in running memory to
the information stored in non-volatile memory.
This command displays settings for key command modes. Each mode group is separated by “!” symbols, and includes the
configuration mode command, and corresponding commands. This command displays the following information:
-Switch’s MAC address
-SNTP server settings
-Broadcast storm control settings
-802.1Q tunnel settings