Planet Technology SGSD-1022 - Manual (Page 399)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
399
calendar set Sets the system date and time PE
show calendar Displays the current date and time setting NE, PE
Table 5-19 Time Commands
sntp client
This command enables SNTP client requests for time synchronization from NTP or SNTP time servers specified with the sntp
servers command. Use the no form to disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the switch
only records the time starting from the factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2001).
This command enables client time requests to time servers specified via the sntp servers command. It issues time
synchronization requests based on the interval set via the sntp poll command.
Example
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#end
Console#show sntp
Current time: Dec 23 02:52:44 2002
Poll interval: 60
Current mode: unicast
SNTP status: Enabled
SNTP server: 10.1.0.19 0.0.0.0 0.0.0.0
Current server: 10.1.0.19
Console#
Related Commands
sntp server
sntp poll
show sntp