Planet Technology SGSD-1022 - Manual (Page 582)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
582
Console(config)#vlan database
Console(config-vlan)#private-vlan 2 primary
Console(config-vlan)#private-vlan 3 community
Console(config)#
private vlan association
Use this command to associate a primary VLAN with a secondary (i.e., community) VLAN. Use the no form to remove all
associations for the specified primary VLAN.
Syntax
private-vlan primary-vlan-id association {secondary-vlan-id | add secondary-vlan-id | remove secondary-vlan-id} no
private-vlan primary-vlan-id association
primary-vlan-id -ID of primary VLAN.
(Range: 1-4094, no leading zeroes).
secondary-vlan-id -ID of secondary (i.e, community) VLAN. (Range: 1-4094, no leading zeroes).
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
Secondary VLANs provide security for group members. The associated primary VLAN provides a common interface for
access to other network resources within the primary VLAN (e.g., servers configured with promiscuous ports) and to
resources outside of the primary VLAN (via promiscuous ports).
Example
Console(config-vlan)#private-vlan 2 association 3
Console(config)#
switchport mode private-vlan
Use this command to set the private VLAN mode for an interface. Use the no form to restore the Default Setting .
Syntax
switchport mode private-vlan {host | promiscuous}
no switchport mode private-vlan host – This port type can subsequently be assigned to a community or isolated VLAN.
promiscuous – This port type can communicate with all other promiscuous ports in the same primary VLAN, as well as
with all the ports in the associated secondary VLANs.