Planet Technology SGSD-1022 - Manual (Page 511)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
511
IP extended access-list A6:
deny tcp any any control-flag 2
permit any any
Console#
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
Console# show access-group
Interface ethernet 1/1
IP access-list jerry in
Interface ethernet 1/10
IP access-list jerry out
Console#
5.15 Interface Commands
These commands are used to display or set communication parameters for an Ethernet port, aggregated link, or VLAN.
Command Function Mode
interface Configures an interface type and enters interface configuration
mode
GC
description Adds a description to an interface configuration IC
speed-duplex Configures the speed and duplex operation of a given interface
when autonegotiation is disabled
IC
negotiation Enables autonegotiation of a given interface IC
capabilities Advertises the capabilities of a given interface for use in
autonegotiation
IC
flowcontrol Enables flow control on a given interface IC
shutdown Disables an interface IC