Planet Technology SGSD-1022 - Manual (Page 356)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
356
Console(config)#
5.5.2 Banner Information Commands
These commands are used to configure and manage administrative information about the switch, its exact data center location,
details of the electrical and network circuits that supply the switch, as well as contact information for the network administrator
and system manager. This information is only available via the CLI and is automatically displayed before login as soon as a
console or telnet connection has been established.
Command Function Mode
banner configure Configures banner information displayed before login GC
banner configure company Configures Company information displayed by the banner GC
banner configuredc-powerinfo Configures DC Power information displayed by the banner GC
banner configuredepartment Configures Department information displayed by the banner GC
banner configureequipment-info Configures Equipment information displayed by the banner GC
banner configureequipment-location Configures Equipment Location information displayed by
thebanner
GC
banner configureip-lan Configures IP and LAN information displayed by the banner GC
banner configurelp-number Configures LP Number information displayed by the banner GC
banner configure manager-info Configures Manager contact information displayed by
thebanner
GC
banner configure mux Configures MUX information displayed by the banner GC
banner configure note Configures miscellaneous information displayed by the banner
under the Notes heading
GC
show banner Displays all banner information NE, PE
Table 5-8 Banner Commands
banner configure
This command is used to interactively specify administrative information for this device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command. When the administrator finishes typing the