Planet Technology SGSD-1022 - Manual (Page 468)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
468
reauth-enabled:
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout:
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant Current
Identifier
Intrusion action
Enable
1800
30
40
30
10
2
5
Authorized
Single-Host
5
Auto
00-30-4F-49-5e-dc
3
Guest VLAN
Authenticator State Machine
State
Reauth Count
Authenticated
0
Backend State Machine
State
Request Count
Identifier(Server)
Idle
0
2
Reauthentication State Machine
State Initialize
5.12.10 Management IP Filter Commands
This section describes commands used to configure IP management access to the switch
Command Function Mode
management Configures IP addresses that are allowed management access GC
show management Displays the switch to be monitored or configured from a
browser
PE
Table 5-39 IP Filter Commands
management
This command specifies the client IP addresses that are allowed management access to the switch through various protocols.
Use the no form to restore the default setting.
Syntax
[no] management {all-client | http-client | snmp-client | telnet-client} start-address [end-address]
all-client -Adds IP address(es) to the SNMP, web and Telnet groups.
http-client -Adds IP address(es) to the web group.