Planet Technology SGSD-1022 - Manual (Page 114)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
114
The page includes the following fields:
Object Description
• Name
Interface label.
• Type
Indicates the port type. The possible type such as:
- 100BASE-TX
- 1000BASE-T
- 1000BASE-SFP
• Admin Status
Shows if the interface is enabled or disabled.
• Oper Status
Indicates if the link is Up or Down.
• Speed Duplex Status
Shows the current speed and duplex mode. (Auto, or fixed choice)
• Flow Control Status
Indicates the type of flow control currently in use.
- IEEE 802.3x
- Back-Pressure
- None
• Autonegotiation
Shows if auto-negotiation is enabled or disabled.
• Trunk Member
Shows if port is a trunk member.
• Creation
Shows if a trunk is manually configured or dynamically set via LACP.
(Trunk Information only.)
In some situation, when the Managed Switch port is set to “Auto-negotiation” mode and
the link partner (ex. PC or another switch) is force set to “100Full”, the speed duplex status
shows “100Half” since the Managed Switch is fail to negotiation with the link partner.