Planet Technology SGSD-1022 - Manual (Page 378)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
378
--------------------------------------------------------------------------
Total free space: 3276800
Console#
whichboot
This command displays which files were booted when the system powered up.
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See the table under the dir command for a
description of the file information displayed by this command.
Console#whichboot
File name File type Startup Size (byte) -> align?
-------------------------------- -------------- ------- ----------
Unit1:
SGSD-1022_DIAG_V0011.bix
Boot-Rom
Image
Y 305424
SGSD-1022_RUNTIME_V0035_m.bix
Operation
Code
Y 3018936
startup1.cfg
Config
File
Y 4648
Console#
boot system
This command specifies the image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
boot-rom* - Boot ROM.
config* - Configuration file.
opcode* - Run-time operation code.
filename -Name of the configuration file or code image.
* The colon (:) is required.
Default Setting
None