Map access-list ip, Map access-list mac – Planet Technology SGSD-1022 User Manual

Page 628

User’s Manual of SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

628

Console(config)#map ip tos 0 cos 1

Console(config)#map ip tos

map access-list ip

This command sets the output queue for packets matching an IP ACL rule. Use the no form to remove the CoS queue mapping.

Syntax

[no] map access-list ip acl_name cos cos-queue

acl_name – Name of the IP ACL. (Maximum length: 16 characters)

cos-queue – Port CoS queue. (Range: 0-3)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

You must configure an ACL before you can map a CoS queue to the rule.

Example

Console(config)#interface ethernet 1/2

Console(config-if)#map access-list ip bill cos 0

Console(config-if)#

map access-list mac

This command sets the output queue for packets matching a MAC ACL rule. Use the no form to remove the CoS queue

mapping.