Planet Technology SGSD-1022 - Manual (Page 352)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
352
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
The ! command repeats commands from the Execution command history buffer when you are in Normal Exec or Privileged
Exec Mode, and commands from the Configuration command history buffer when you are in any of the configuration modes. In
this example, the !2 command repeats the second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#
reload
This command restarts the system.
When the system is restarted, it will always run the Power-On Self-Test. It will also retain all
configuration information stored in non-volatile memory by the copy running-config
startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
Console# reload