Planet Technology SGSD-1022 - Manual (Page 434)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
434
Console(config)#
tacacs-server retransmit
This command sets the number of retries. Use the no form to restore the default.
Syntax
tacacs-server retransmit number_of_retries no tacacs-server retransmit
number_of_retries -Number of times the switch will try to authenticate logon access via the TACACS+ server. (Range:
1-30)
Default Setting
2
Command Mode
Global Configuration
Example
Console(config)# tacacs-server retransmit 5
Console(config)#
tacacs-server timeout
This command sets the interval between transmitting authentication requests to the TACACS+ server. Use the no form to
restore the default.
Syntax
tacacs-server timeout number_of_seconds no tacacs-server timeout
number_of_seconds -Number of seconds the switch waits for a reply before resending a request. (Range: 1-540)
Default Setting
5 seconds
Command Mode
Global Configuration
Example
Console(config)# tacacs-server timeout 10
Console(config)#