Planet Technology SGSD-1022 - Manual (Page 349)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
349
Quality of Service Configures Differentiated Services
Multicast Filtering Configures IGMP multicast filtering, query parameters, specifies ports attached to a
multicast router, and enables multicast VLAN registration
IP Interface Configures IP address for the switch
Table 5-4 Command Groups
The access mode shown in the following tables is indicated by these abbreviations:
ACL (Access Control List Configuration) NE (Normal Exec)
CM (Class Map Configuration) PE (Privileged Exec)
GC (Global Configuration) PM (Policy Map Configuration)
IC (Interface Configuration) SG (Server Group)
LC (Line Configuration) VC (VLAN Database Configuration)
MST (Multiple Spanning Tree)
5.4 General Commands
These commands are used to control the command access mode, configuration mode, and other basic functions.
Command Function Mode
enable Activates privileged mode NE
disable Returns to normal mode from privileged mode PE
configure Activates global configuration mode PE
show history Shows the command history buffer NE, PE
reload Restarts the system PE
prompt Customizes the prompt used in PE and NE mode GC
end Returns to Privileged Exec mode any config. mode
exit Returns to the previous configuration mode, or exits the CLI any
quit Exits a CLI session NE, PE
help Shows how to use help any
? Shows options for command completion (context sensitive) any
Table 4-5 General Commands
enable
This command activates Privileged Exec mode. In privileged mode, additional commands are available, and certain commands
display additional information. See “ Understanding Command Modes ”.
Syntax
enable [level]
level - Privilege level to log into the device.