Planet Technology SGSD-1022 - Manual (Page 651)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
651
5.25.4 IGMP Filtering and Throttling Commands
In certain switch applications, the administrator may want to control the multicast services that are available to end users. For
Example , an IP/TV service based on a specific subscription plan. The IGMP filtering feature fulfills this requirement by
restricting access to specified multicast services on a switch port, and IGMP throttling limits the number of simultaneous
multicast groups a port can join.
Command Function Mode
ip igmp filter Enables IGMP filtering and throttling on the switch GC
ip igmp profile Sets a profile number and enters IGMP filter profileconfiguration
mode
GC
permit, deny Sets a profile access mode to permit or deny IPC
range Specifies one or a range of multicast addresses for a profile IPC
ip igmp filter Assigns an IGMP filter profile to an interface IC
ip igmp max-groups Specifies an IGMP throttling number for an interface IC
ip igmp max-groups action Sets the IGMP throttling action for an interface IC
show ip igmp filter Displays the IGMP filtering status PE
show ip igmp profile Displays IGMP profiles and settings PE
show ip igmp throttle interface Displays the IGMP throttling setting for interfaces PE
Table 5-88 IGMP Filtering and Throttling Commands
ip igmp filter (Global Configuration)
This command globally enables IGMP filtering and throttling on the switch. Use the no form to disable the feature.
Syntax
[no] ip igmp filter
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
IGMP filtering enables you to assign a profile to a switch port that specifies multicast groups that are permitted or denied
on the port. An IGMP filter profile can contain one or more, or a range of multicast addresses; but only one profile can be
assigned to a port. When enabled, IGMP join reports received on the port are checked against the filter profile. If a
requested multicast group is permitted, the IGMP join report is forwarded as normal. If a requested multicast group is
denied, the IGMP join report is dropped.
IGMP filtering and throttling only applies to dynamically learned multicast groups, it does not apply to statically configured
groups.