Philips V24CT - Manual (Page 357)

AC and DC (Battery) Operation
Battery Information (V24CT and V26CT only) 12-3
Ba
tte
ry
I
n
for
m
a
ti
on
(V
24
CT
an
d
V
26C
T
Operating
Instructions The following is a list of AC and battery operating instructions.
• The batteries continuously charge when the instrument is
connected to AC power. Charging occurs whether the monitor is
turned Off or On.
Caution
Philips Medical Systems recommends you fully charge the batteries
before using the V24CT for the first time. Plug the monitor into AC power
(line power) for an initial charging cycle.
• AC power is indicated by the green LED indicator.
• Battery charging is indicated by the amber LED.
The LED indicator flashes when the batteries first start charging,
and continues flashing until the batteries are 30 - 40% charged.
• When the batteries are 30 - 40% charged, the indicator goes from
flashing to continuously on. The
indicator will be
on steady until the batteries are 90% charged. The
indicator will turn off when both batteries are 90% charged or when
the line power is disconnected.
• The green LED illuminates when the battery
charging function has reached 90% charged, and will stay on steady
even when the batteries are fully charged. If the line power is
disconnected, this LED indicator will be turned off.
AC Power
Battery Charging
Battery Charging
Battery Charging
Battery Charged
Delayed
Record
Trends/Calc Module Setup
Confirm
Battery
Charging Battery
Charged AC
Power