Philips V24CT User Manual

Page 309

Types of Transfer

Data Transfer 10-13

•

Transferring data from a source monitor via a transit monitor to
a destination monitor requires special handling if:

–

The source monitor and the destination monitor are:

— CMS Release G or later or
— V24 or V26 Release A.0 or later

and

–

The transit monitor is:

— CMS Release E or F
— V24 Release E
— CTS

1. Plug the Data Transfer Module into the rack of the source

monitor.

2. Press the

hardkey on the module and transfer all

data to the module.

3. Plug the Data Transfer Module into the rack of the transit

monitor.

4. Select

in the Data to Module task window

to collect new data to the module without clearing the module.

5. Remove the module from the transit monitor and plug it into

the destination monitor.

6. Press the

hardkey on the module and transfer the

data to the monitor.

Note—

With specific configurations, data loss can occur when transferring

data to a V24 or V26 Release B.0 via the Data Transfer module.

Module

Collect New Data

Pts

Refernce

Monitor

This manual is related to the following products: