What to do if your report does not print, What to do if your report does not print -30 – Philips V24CT User Manual
Page 268
Printing Reports
8-30 Trends and Calculations
Tr
e
nds
a
nd
Calcula
tion
s
What to Do
If Your
Report Does
Not Print
During normal report printing, messages appear in the status message
area of the display. However, sometimes a printing status message may
alert you to a problem that needs to be corrected. The following
information describes printing messages that may appear, what they
mean, and what you may need to do to correct a problem (should there
be one).
MESSAGE: Printer Malfunction
Meaning:
While printing a report, the monitor detected a problem
with the printer.
What You Need to Do:
Check the printer to be sure it is plugged in,
turned on, and has paper loaded. If you are using a printer at the
central station, be sure the central station is operating. If these do
not correct the problem, call your Philips service representative.
MESSAGE:
Report On Printer Has Been Canceled
Meaning:
The report sent to the printer has been stopped because
someone has pressed the Cancel Report.
What You Need to Do:
You don't need to do anything.
MESSAGE: No Printer Available
Meaning:
A report cannot be started on this printer.
What You Need to Do:
Check the printer to be sure it is plugged in,
turned on, and has paper loaded. If you are using a printer at the
central station, be sure the central station is operating. If these do
not correct the problem, call your Philips service representative.
MESSAGE: Report Complete
Meaning:
A requested report has been printed.
What You Need to Do:
You don't need to do anything.
MESSAGE: Report In Progress
Meaning:
A requested report is being printed on a printer.
What You Need to Do:
You don't need to do anything.