K n1 n2 data – Star Micronics Line Thermal Printer User Manual
Page 91
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-75
k n1 n2 data
[Name] Transfer raster data
[Code] ASCII
k n1 n2 d1
d2
... dk
Hex.
6B n1 n2 d1
d2
... dk
Decimal 107 n1 n2 d1
d2
... dk
[Defined Area]
0≤n1≤255
0≤n2≤255
0≤d≤255
k≤ n1+n2 x 256
1≤k
[Initial Value]
- - -
[Function]
Sends raster data.
Raster data is sent in (n1 + n2 x 256) byte counts as binary data.
Raster data exceeding the print area currently set is discarded.
The image buffer expanded position returns to the head of the current dot row without an automatic
line fed after expanding the image buffer data 1 dot row using this command.
Also, data expansion is duplicated on the data in the current image buffer (OR process).
The following shows expanded image buffer for the set raster print color.
n is a decimal description (max. 255 digits) using ASCII characters.
Print color
Expanded image buffer
Black
Image buffer for black
Cyan
Image buffer for black
Magenta
Image buffer for black
Yellow
Image buffer for black