Star Micronics Line Thermal Printer - Manual (Page 52)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-36
ESC X n1 n2 d1...dk
[Name] Fine density bit image (Compatible with 24 bit wire dots)
[Code]
ASCII ESC X n1 n2 d1 ... dk
Hex. 1B 58 n1 n2 d1 ... dk
Decimal 27 88 n1 n2 d1 ... dk
[Defined Area]
1 ≤ (n1 + n2 x 256) ≤ printable region
k = {(n1 + n2 x 256) x 3}
0≤d≤255
[Initial Value] - - -
[Function] Prints input bit images with 8 dots/mm resolution for both horizontal and vertical.
The following shows the data processing in this command.
• When {(n1 + n2 x 256) x 3} exceeds the printable region, data after d1 is handled as normal data.
• When {(n1 + n2 x 256) x 3} exceeds the printable region that is currently set, only the data in the
printing region is printed.
At this time, all data for the print region is discarded.
• If the current position already exceeds the print region, this command discards all data.