Star Micronics Line Thermal Printer - Manual (Page 116)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-100
ESC GS * W
[Name] Register mark format to non-volatile memory
[Code]
ASCII ESC GS * W
Hex. 1B 1D 2A 57
Decimal 27 29 42 87
[Defined Area]
- - -
[Initial Value] - - -
[Function] Registers the mark format (mark height, mark line feed amount, each mark color, and each mark
horizontal width) to the non-volatile memory.
After registering to the non-volatile memory, the printer is reset.
ESC GS * C
[Name] Initialize mark format in the non-volatile memory
[Code]
ASCII ESC GS * C
Hex. 1B 1D 2A 43
Decimal 27 29 42 67
[Defined Area]
- - -
[Initial Value] - - -
[Function] Initializes the registered mark format (mark height, mark line feed amount, each mark color, and each mark
horizontal width) in the non-volatile memory. After initialization, the printer is reset.
Initial Value of the Mark Format
• Mark Height:: “016” 16 dots
• Mark line feed amount:: “032” 32 dots
• Mark color: “0” (White → All mark numbers)
• Mark horizontal width: “080” 80 dots → All mark numbers)