Star Micronics Line Thermal Printer - Manual (Page 37)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-21
ESC J n
[Name] n/4 mm line feed
[Code]
ASCII ESC J n
Hex. 1B 4A n
Decimal 27 74 n
[Defined Area]
1≤n≤255
[Initial Value] - - -
[Function] Executes a n/4mm paper feed.
If print data exists in the line buffer, it prints that data.
Using this command will intermittently feed paper, therefore, it is normally recommended that this
command not be used.
ESC I n
[Name] n/8mm line feed
[Code]
ASCII ESC I n
Hex. 1B 49 n
Decimal 27 73 n
[Defined Area]
1≤n≤255
[Initial Value] - - -
[Function] Executes a n/8mm paper feed.
If print data exists in the line buffer, it prints that data.
Using this command will intermittently feed paper, therefore, it is normally recommended that this
command not be used.