Star Micronics Line Thermal Printer - Manual (Page 73)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-57
ESC s n1 n2
[Name] Set 2 byte Chinese character left/right spaces
[Code]
ASCII ESC s n1 n2
Hex. 1B 73 n1 n2
Decimal 27 115 n1 n2
[Defined Area]
0≤n1≤7
48≤n1≤55 (”0”≤n1≤”7”)
0≤n2≤15
48≤n2≤57 (”0”≤n2≤”9”)
65≤n2≤70 (”A”≤n2≤”F”)
[Initial Value]
Memory switch setting
[Function] Adds n1 dot left space and n2 dot right space to Chinese characters.
This command is ignored for models not equipped with Chinese fonts (for overseas) and when the
specification for the location of use is specified as SBCS (single byte countries) by the memory
switch.
ESC t n1 n2
[Name] Set 1 byte Chinese character left/right spaces
[Code]
ASCII ESC t n1 n2
Hex. 1B 74 n1 n2
Decimal 27 116 n1 n2
[Defined Area]
0≤n1≤7
48≤n1≤55 (”0”≤n1≤”7”)
0≤n2≤15
48≤n2≤57 (”0”≤n2≤”9”)
65≤n2≤70 (”A”≤n2≤”F”)
[Initial Value]
Memory switch setting
[Function] Adds n1 dot left space and n2 dot right space to 1 byte characters.
This command is ignored for models not equipped with Chinese fonts (for overseas) and when the
specification for the location of use is specified as SBCS (single byte countries) by the memory
switch.