Star Micronics Line Thermal Printer User Manual
Page 152
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
5-11
Bit Contents
Status
Model
Compatability
“0”
“1”
TSP800
V. 4.0 or later
TSP700
V. 3.0 or
later
TSP600
V. 3.0 or
later
TUP900 TSP1000 TSP828L TSP700II TSP650
7
Fixed
at
0
-
- - - - - - - -
6
ETB Counter Bit-4
OK
OK
OK
OK
OK
OK
OK
OK
5
ETB Counter Bit-3
OK
OK
OK
OK
OK
OK
OK
OK
4
Fixed
at
0
-
- - - - - - - -
3
ETB Counter Bit-2
OK
OK
OK
OK
OK
OK
OK
OK
2
ETB Counter Bit-1
OK
OK
OK
OK
OK
OK
OK
OK
1
ETB Counter Bit-0
OK
OK
OK
OK
OK
OK
OK
OK
0
Fixed
at
0
-
- - - - - - - -
(*) ETB Counter
This counter is the 5 bit ETB counter.
(It counts from 0 to 31. When the counter overflows, it counts up from 31 to 0.)
This counter is incremented by 1 using the
The ETB counter is initialized by the following commands. When doing so, ASB ETB status is cleared.
However, when initializing the ETB counter, ASB is not transmitted.
•
: ETB Counter Initialization
•
: Cancel print data and initialize commands